Texas Style Beef Brisket

This past weekend, my best friend Patrick came up with his wife and daughter from South Carolina. While a North Carolina native, Patrick spent three years living right on the US / Mexican border in Laredo, TX. While there, he ate more Mexican food than he could ever possibly wish, and learned what a Mexican license plate looked like. Beyond the border patrol, the tumbleweeds, and the scathing Texas heat, Patrick did learn a little something about meat. That meat dear readers is Texas Beef Brisket, a hunk of semi-tough cow coming from the front, which, when smoked properly becomes and juicy and tender as any meat around.

Are you getting Hungry Yet?

Just a preface here – there are multiple styles of Texas Brisket. This includes the way it is cooked – over direct heat or in an indirect heat configuration, the seasoning and sauce used, and the type of wood used (most people think mesquite when thinking Texas Brisket). Despite this wide array, we are going to focus in on one particular style – something you may be less familiar with – Oak Smoking!

I was intrigued at the idea when Patrick told me he was bringing me some Oak for smoking the brisket. I’ve done brisket before, and I’ve used mesquite and it turned out quite well. To be honest, I’ve never cooked with Oak, though I have had Oak Brisket at Rudy’s Country Store and BAR-B-Q in Laredo.

The process began Friday night, after procuring the meat. The cut I had was a USDA Choice Angus Beef Brisket right around 5 lbs. I pulled the meat out and set it on the counter. I injected it with probably 6-8 ounces of Swanson beef broth. The broth began to slowly push out through some of the “cracks” in the muscle and it created a nice juicy sheen on the meat.

I spread all the overflowed broth over the brisket and then had Alicia my wonderful fiancé sprinkle my brisket rub on as I patted it into the cut. After a thorough rubbing in, the cut was ready to sit. I placed it back in the box to refrigerate overnight – for about 12 hours. This gives the rub a chance to work its way in a little bit, and the broth to penetrate additional areas inside the brisket.

I started the charcoal chimney a few minutes after 9am on Saturday. I set up the firebox for the minion method, and right at 10am, the coals were on, the smoker had normalized and I was able to throw the brisket on. The temperature never really moved from 225 because of my quick open and close, and the smoking had begun! We actually had some errands to run, so we headed out, returned around 11:30, the smoker was holding strong, so we headed to lunch to meet Patrick and Sarah.

We returned from lunch around 2pm, and the smoker was just starting to drop. It was at this point around 185 degrees – lower than I would normally like it to fall, but not too bad for not having been touched for four hours. I quickly grabbed some hot coals to start a new chimney. At this point, we also had the oak now, so we quickly split a couple of pieces to throw on to get the temp back up. With some careful damper modulation, the temp was quickly back up to 225 and holding until we could get the next chimney in.

Once the next chimney was on, it was basically smooth sailing. We’d pop out and check on the temperatures every hour or so, with basically nothing going on for us to do. What we did do in the meantime however was split the oak into chunks just small enough to fit into my minion box. Not having an axe at my house, Patrick had brought a little hatchet – but oak, dear friends, is a very hard wood, and a small hatchet was proving less useful than you might imagine.

So, the idea that quickly came to mind was to bury the hatchet – no pun there – and then drive it into the logs with my Wilton Sledgehammer. This worked amazingly well, better than an axe in fact because we were able to more accurately slice the size pieces of wood we wanted.

Once the wood was chopped – the process became something like this. Once the smoker would begin to taper off ever so slightly, we would prepare a new chimney, and while waiting for it to be ready, we would put in oak to stoke the temperature, keep it in our ideal range, and smoke the heck out of our brisket! We also would occasionally throw in some oak in between for two purposes; add flavor to our brisket, and watch the smoke roll out of the chimney with great satisfaction like small children. We were careful to not over smoke however.

Smoke Ring - The pink part!

At around 4pm we set the bad boy up with the Texas Crutch. The internal temperature was just a little shy of 180 degrees and truthfully, we were heading to Wedge Brewery for a couple cold ones in the mean time.

After some of the most delicious beer in Asheville, cart style Mexican snacks for all, and peanut shelling galore, we headed back to finish off the smoke. At this point, I wanted to make one final push on the temperature, so I tossed in a couple more oak logs and one final chimney of charcoal.

At right around 7:15, or 9 hours and 15 minutes after the brisket made its way onto the smoker initially, it was pulled off to let rest for about 30 minutes. I put it in the oven, still tightly wrapped in foil. I chose the oven because it was crappy outside, and with the oven off, it’s still a really great insulator.

Finally, the moment we had all been waiting for – the brisket came out of the oven and onto the carving board. Being careful to carve against the grain, I sliced in. The brisket had an INCREDIBLE smoke ring on it. I carved about 2/3 of the meat up, and we ate it on sandwiches, or on the side, with the Western NC style BBQ sauce – spicy or not depending on your taste. It's not Texas, but it's good!

Sliced Brisket Ready for Serving

Patrick actually had his sandwich double stacked with brisket, covered in sauce, with a handy helping of pickle slices on the bottom. This is how he ate them in Texas, so on my second sammy (I know, piggy, wint wint) I ate it that way as well. I will say, it was pretty good like this, though being from NC it just still doesn’t feel 100% kosher to have pickles mixed with any type of smoked meat. Maybe if we keep cooking brisket I’ll adopt it as my own.

Verdict of the day: Texas Crutch plus beef broth injections – my newest adjustments – made a huge difference, and this was the best brisket I’ve done yet, and one of the, if not the best briskets I’ve ever had. The other big difference: oak. The oak is hearty and imparts a distinct smokiness without being too heavy. For the amount we had in the smoker, it certainly was a “lighter” offering of smoke than other woods might have. I’ll definitely use it again, and may try mixing it with other woods.

I also want to give a shout out to meathead. I’ve learned a lot from reading his page on Beef Brisket, so if you’d like to learn more, I’d suggest you go check it out. His page is less narrative and more technical than mine and will give you some great info at Meathead's Texas Brisket Thanks for the read, come back soon!

Western NC BBQ Sauce

So I promised a writeup on rubs and BBQ sauces as my next post. Unfortunately for you, fortunately for my visit count, I’m going to be posting them gradually over time. Truthfully, the primary reason for this is that I don’t know the exact measurements in any of my rubs, as I use an eyeball and taste-o-meter to get it right. That said, I’ll be taking down measurements over the next couple of weeks and doing writeups for various rubs.

That said, not to leave you dangling, I do have one recipe on hand which I’d like to share and I think you’ll enjoy it – all my friends do! It’s pretty easy to make and comes in two varieties – normal and spicy. The recipe will make a little over two full “squeeze” bottles which you can get at Wal-Mart or elsewhere for about $.99 each, and they make great pieces for storage as well as saucing.

The Basic Recipe

Ingredients

½ Cup Apple Cider Vinegar

¼ Cup Water

1 ¼ Cup brown sugar

2/3 Cup Molasses

1 Tablespoon garlic powder

5 Tablespoons worstershire sauce

2 Tablespoons Texas Pete (substitute something else if you’d like, but this is my favorite)

2 “Squeezes” of mustard (whatever the heck that means!)

2 Tablespoons of lemon juice

1 ¾ Cup Ketchup

3 Tablespoons of ground pepper (fresh if possible)

¼ Cup sugar

1/3 Cup Flower (sifted)

Use this recipe in a stove-top sauce pan.

Once all of your ingredients are together, mix the Apple Cider Vinegar and Water and bring it to just before a boil. Right before the boil, mix in the Garlic Power first, then the Brown Sugar, then the Sugar. Mix thoroughly to dissolve as much as possible. Once well mixed, add in the ketchup, worstershire, and then the remaining ingredients except the flower. Mix this all together and let it simmer for 20 minutes. One the consistency is smooth after simmering, sift in the flower. This step should be done slowly, sift a little bit of flower in, and stir it vigorously to mix it in. If you dump too much flower at once, it will clump, and the only reason you are adding flour is consistency.

Once the flower is mixed in, let it simmer for about 10 more minutes. Let it cool down to a temperature that is warm to the touch, and you are ready to transfer it to the bottles with a funnel.

The Spicy Recipe

What I like to do is transfer one bottle’s worth of the recipe above, then make a spicier batch. It is very simple to do, just add in ½ teaspoon of Cayenne and ½ teaspoon of Chili powder. Mix those in well. After that, mix in ½ teaspoon of Dave’s Gourmet Ghost Pepper. Mix vigorously over low heat for about 5 minutes. If you don’t have Dave’s, use a substitute that is also very hot, or something less spicy and adjust the portion to taste!

Pulled Pork Extravaganza

So, you may have read my last post, Don’t Burn the Burgers! which was written after that weekend, but not posted until yesterday. For that I apologize, and I’m telling this to my readers so you won’t be confused when I write this expose on my pulled pork from last weekend.

The winter can be brutally cold here in Asheville, and despite my one frustrating attempt to smoke chicken this winter in seventeen degree weather with a two degree wind chill, I haven’t been using the smoker much in the “off-season.” Since this past weekend was nice and sunny with highs in the mid 50s and low 60s respectively, I had to get out and fire up the smoker.

I decided I would invite over some friends for some cold beers, good times, and delicious pulled pork. I want to preface by saying that pulled pork and I have a love-hate relationship, since it is probably the one thing I find most frustrating, not because of the flavor, but because of the texture.

Boston butt trimmed and ready for rub

Understanding all that, I want to describe the process by which pulled pork should be properly prepared. Again, all of this stuff is something that anyone who is a backyard chef can do, and if you don’t have a smoker, you can emulate with indirect heat in a large kettle charcoal grill.

First, you must trim your meat. Some folks like to skip this step, gesturing that the fat will melt off over time in the smoker, but I like to go ahead and get a clean rub up front. I want to make sure that my rub is on the meat, not on the fat which is melting away. Trim the fat until there is just a thin layer showing on the “fat side” and then you are ready for rub.

Homemade shaker from a Parmesan can

Rubbing the pork is a crucial step. I’ve done this many ways, including coating the butt with olive oil and then rub, a little apple juice then rub, but my favorite is getting the pork good and dry and literally rubbing the spices into it until it has a nice coating. For my rub, I used a custom homemade concoction, which is a little sweet, a little spicy, and has plenty of salt for tenderizing. My next feature article will be on rubs and BBQ sauces made from scratch, so keep your eyes peeled for that one. I will give you a little preview, and it is my homemade rub distributor – a used parmesan cheese can. For something the size of a Boston butt, it spreads great, doesn’t cause a lot of mess, and keeps your hands clean until you begin rubbing.

After your shoulder is rubbed, I like to let it sit in the house for about an hour. Your meat will not go bad, the temperature will be rising from about 34 degrees to a little closer to room temperature. This also gives you the chance to go fire up your charcoal chimney, and get your smoker ready for the meat.

Boston butt seasons and sitting before the smoke

After the smoker is fired up, the temperature should be normalized right at 225 degrees. This is a perfect temperature for slow and low smoking as I have explained previously. With the smoker normalized, place it on the grill grate, above a pan of water (I custom fabricated my smoker to have a shallow one built in which doubles as a heat shield to the firebox.

Close the cover, and keep your eyes on the temperature. Do your best to keep the temperature around 225 degrees throughout the smoke.

After about four hours, I like to take my butt off the smoker and wrap it in aluminum foil. This is colloquially known as the “Texas Crutch.” This will preserve moisture in the meat. Some folks don’t like doing this for a butt because of its sheer size, but for me, it produces the best results. Remember, I don’t have a $1200 smoker.

After that, just keep an eye on your pig, checking it every couple hours or so. The total cook time should take 1.5 hours per pound. For me, this never holds true, and I always end up having to cook it longer for some reason. The internal temperature of pork is not done until it is at least 160 degrees according to the USDA. The ideal temperature for a Boston butt is 190 degrees, because at that temperature it has fully broken down the meat inside. I didn’t quite get mine to 190, closer to about 185, but that was fine because people were getting hungry, and the meat still turned out awesome!

Boston butt ready to be pulled

Once your pork is done, pull it off the smoker and let it sit inside for 30-45 minutes. When mine is “resting” I like to keep it wrapped in aluminum foil to retain heat and moisture. This gives the juices inside a chance to reset, and normalize. It also will allow the pork to cool enough that you can pull it without burning your fingers (been there, done that!)

After your pork has sat for that time period, you can begin pulling it. I simply take two forks, and pull it into large chunks. Once I have those, I pull it into smaller chunks, more manageable for a sandwich. I pull it and toss it into a bowl, and it is ready to eat!

Have your guests serve themselves with tongs and buns on paper plates! I live in Western North Carolina, where the sauce of choice is typically a tomato based, so I had that in two forms – normal and spicy. Additionally, since I am from the Piedmont of North Carolina, my favorite is Eastern NC style which is a vinegar based, so I had that available as well. I’ll be featuring recipes for these sauces along with my rubs in my next piece.

My friends loved it. I had a 6 pound shoulder, and about 10 people over eating and it was all gone – you do the math – with potato and macaroni salad, cole slaw, and macaroni and cheese, each person still manage to eat on average over a half a pound of pork.

Please come back and read up on the sauces and rub feature coming before the end of this week and check back regularly!